The DJ112 is a very compact, high-output, self-powered loudspeaker…The DJ112 can be used with up to two double 18” subwoofers for each cabinet, and deliver all the mid-high you need to keep up with them. As a DJ monitor it provides tight, punchy performance and doesn’t distort at extremely high levels.
12 inch co-axial, bi-amplified, self-powered MicroMain and monitor
Frequency Response (+-3 dB)
80 – 18,000 Hz
Maximum Sustained Output
123 dB SPL, 1m, 2pi, half-space
Nominal Dispersion (H° x V°)
80 x 80 (Conical)
1500 Watt 2 Channel Powersoft Class D Amplifier
Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and limiting
Electrical Connectors, Amplifier
Neutrik powerCON Input (Blue) NAC3FCA
Electrical Connector, Mains
Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison), NEMA 5-15 (Edison) or powerCON loop through jumper for use above subwoofer on request.
Voltage Operating Range
90-250V. Auto-sensing, auto-switching, PFC universal power supply.
Current Draw, Nominal
432 W, 3.6A @ 120 Volts (typical, 1/8 max power)
Signal Input Connector
Signal Output Connector
XLR-M (pass-through only)
Rotary Level Control with adjustment from Off to +12dB, Push-button Preset Select
LEDs for Power/ready, Signal, Clip and Protect. LED indicating selected preset
2-way mid-high. Direct radiating vented 12″ LF, co-axial horn-loaded HF
Transducer (Low Frequency)
1 x 12 in. diameter (300 mm) neodymium motor woofer with 3 in. (76 mm) copper winding voice coil.
Transducer (High Frequency)
1 x 3 in. (76 mm) diaphragm compression driver on 1.4 in. throat concentrically mounted wave guide
16 mm Baltic Birch plywood. Equipped with an integrated handle and a 35 mm pole socket mount with M20 threaded insert
14 in. x 14 in. x 11.5 in.
Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating
CNC Waterjet cut 1/8 inch aluminum over Black perforated, powder-coated steel
1 (35 mm, M20 threaded insert)
1 Integrated Handle
Threaded Pole for DJ112, CCM112 – 26 in. length and 48 in. lengths available
35mm Pole Stand – Supports loudspeaker above subwoofer equipped with pole socket; Tripod Stand – Supports loudspeaker from ground
Wall, Ceiling and Desk Mount options
Heavy-duty padded nylon transport cover with carrying handles