Bassboss ZV18 Powered Subwoofer
JK Pro Audio
Regular price
$4,125.00
$3,295.00
Sale
EXTENDED, EXTRAORDINARY BASS
- Solid, Flat Response To 21 Hz/Two
- Protected, Self-Powered System
- Deepest Mobile Sub on the Market
Based on the ground-breaking ZV28 subwoofer design, the ZV18 will produce the notes and effects that are totally lost on ordinary subs. If you need the lowest frequencies with exceptional tonality, this is the cabinet.
SPECS
ACOUSTICAL |
|
Loudspeaker Description | Extended Low-Frequency Single 18 Inch Powered Subwoofer |
Frequency Response (±3 dB) | 24 Hz – Adjustable from 60 to 95 Hz |
Frequency Response, Pair (±3 dB) | 21 Hz – Adjustable from 60 to 95 Hz |
Maximum Sustained Output | 127 dB SPL, 1 meter, half-space (ground plane) |
Maximum Sustained Output, Pair | 133 dB |
Nominal Dispersion (H° x V°) | 360 x 360 – Cardioid Mode Available with Multiple Boxes |
ELECTRICAL |
|
Amplification | 2400 Watt Continuous RMS Class D Subwoofer Amplifier |
Processing | Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting |
Electrical Connectors, Amplifier | Neutrik powerCON Input (Blue) NAC3FCA |
Electrical Connector, Mains | Standard US 3-pin 120V electrical plug: NEMA 5-15 (Edison) |
Voltage Operating Range | 90-132VAC, 55-65Hz |
Current Draw, Nominal | 360 W, 3A @ 120 volts (typical, 1/8 max power) |
Signal Input Connector | XLR-F |
Signal Output Connector | XLR-M (pass-through only) |
PHYSICAL |
|
Enclosure Type | Direct radiating, vented enclosure, optimally tuned for high sensitivity at extremely low frequencies |
Transducer | 1 x 18 in. diameter (457 mm) neodymium motor woofer with 4.5 in. (115 mm) copper winding voice coil and 60 mm (2.36″) peak to peak excursion. Waterproof fiber composite cone |
Cabinet Construction | 18 mm Baltic Birch plywood, extensive integrated bracing. Equipped with 4 integrated handles, 1 pole socket, 4 large rubber feet, and 4 interlocking foot pockets |
Dimensions (HxWxD) | 24 in. x 29.5 in. x 36 in. (24.75 in. high with feet) |
Net Weight | 161 lbs |
Shipping Weight | 185 lbs |
Exterior Finish | Rugged, weatherproof, black textured, bonded high-pressure polyurethane coating |
Grill | Perforated, powder-coated steel |
Pole Sockets | 1 (35 mm) |
Handles | 4 Integrated Handles |
OPTIONAL |
|
Flying Hardware | Side-pull anchors and/or shoulder eyebolts |
Suspension System | 16 x 3/8 in.-16tpi threaded flypoints |
Faceplate | Special Edition Custom Chaos Grill |
Amplification for Installation | Complete power package including DSP in two space rack chassis for permanent installations |
Installation Version | Available without handles and pole sockets |
Transport Dollies | Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 or 2 cabinets |
Covers | Heavy-duty padded nylon transport covers for 1 or 2 cabinets |